Indoor Led Video Wall P2.5 Advertising Rubik'S Cube Various Specifications With Magnets
Indoor Led Video Wall Features:
Delicated image, wide horizon viewing angle at 140 degree to provide better viewing experience with optimal refresh rate (2000Hz), high grey level (14 bits) and high contrast ratio (2000:1);
P3 indoor SMD2121 led screen;
Good hot dissipation, without fans, no noise, beautiful looking, easy mounting without gap;
Excellent heat dissipation and noiselessness with ultra-quite fan;
Wide view angle and shot view distance, no stroble,friendly to our eyes;
Ideal parameter setting,effectively slowing down the speed of brightness and color reduction;
It features wide viewing angles, so real and beautiful colors will be shown from all directions;
| Pixel | 2.5mm Indoor Led Video Wall | 3mm Indoor Led Video Wall | | Led lamp | SMD 2121 | SMD 2121 | | Module size | 320*160mm | 192*192mm | | Scan method | 1/32 S | 1/32 S | | Brightness | ≧1200cd/sqm | ≧1200cd/sqm | | Pixel density | 160000dots/sqm | 111111dots/sqm | | Panel material | aluminum /Iron cabinet | aluminum /Iron cabinet | | Panel size | 640*640mm | 576*576mm | | 960*960mm | 960*960mm | | Average power consumption | 450w/sqm | 450w/sqm | | Max power consumption | 1000w/sqm | 1000w/sqm | | Best view distance | 2.5-35m | 3-40m | | Gray level | 12-4bit | | View angle | H≧140° V≧140° | | Refresh rate | ≧1920 Hz ≧3840 Hz | | Protection level | IP33 | | Control system | Linsn/Colorlight/Novastar | | Frame frequency | ≧50/60 Hz | | Input voltage | 100-120V 200-240V | | Screen life | 100000h | |
Indoor Led Video Wall FAQ:
Q1: How is the switching sequence of LED display screen?
1) screen switching sequence: on, first turn on the computer, then screen; off, first shut off screen, then computer. 2) Interval of switching LED display must be greater than 1 minute.
Q2: How is the ambient temperature of LED display screen?
When ambient temperature is too high or cooling condition is bad, users had better not to turn on the screen for a long time. Screen shall be installed in temperature from-10°C to 40°C. Over environment temperature range, temperature control equipment must be installed. It is forbidden to install LED display near any heat source.
Q3: How is the ambient humidity of LED display screen?
When installing screen, ambient relative humidity should be in the range from 30% to 70%. It is prone to get static electricity when the indoor humidity is below 30%; When the indoor humidity is higher than 70%, electronic components are easy to get damp.
Product Tags:
|
|
4k Indoor Led Video Wall Panels P2.5 Advertising Rubik'S Cube With Magnets Images
|
